VF-1 Valkyrie and VF-1 Super Valkyrie 1:72 from Robotech (Macross)
- Thread starter Massassi
- Start date
stevethefish
My name's actually not Steve
- Joined
- Jun 12, 2015
- Messages
- 339
So very cool! I started lighting the Imai/Bandai VF-1J Valkyrie a couple of years ago, but it's become a shelf queen.
FYI: that's a Super Valkyrie with the standard fastpack. The Strike Valkyrie has the two cannons on the starboard pod, and unless I'm mistaken, this was featured only in the DYRL movie and not the TV show.
FYI: that's a Super Valkyrie with the standard fastpack. The Strike Valkyrie has the two cannons on the starboard pod, and unless I'm mistaken, this was featured only in the DYRL movie and not the TV show.
Massassi
Member
- Joined
- Aug 25, 2013
- Messages
- 82
So I finished the elevator
Set1 - Macross SDF-1 Prometheus Hanger elevator 1-72 scale
This iconic model is straight from the Macross intro. Modelled using the series intro as reference and using real air plane carrier parts for the under side. This kit consists of 177 parts that need to be 3D printed.
Model can be downloaded here:
https://www.cgtrader.com/3d-print-m...s-sdf-1-prometheus-hanger-elevator-1-72-scaleCreated at 1:72 scale for the same size as the VF-1 Valkyrie. (plane and figures not included)
Set is 29,4 cm wide, 14,5cm heigh and 28cm deep.
It can be printed at any other scale of course.
Kit contains
- Blender file for reference
- With finished coloured model.
- Exploded view of all the parts
- Building instructions
- BOM (showing all the print files, and number of printers per item needed)
- Assembly instructions
- Paint instructions
- STL, OBJ and 3MF files of all parts
- Decals for the letters of the hanger doors
This Kit is part of a larger set, these will be available shortly
If you send me a message I will send you the build instructions for free, so you can see what you need to create this set.
Set1 - Macross SDF-1 Prometheus Hanger elevator 1-72 scale
This iconic model is straight from the Macross intro. Modelled using the series intro as reference and using real air plane carrier parts for the under side. This kit consists of 177 parts that need to be 3D printed.
Model can be downloaded here:
https://www.cgtrader.com/3d-print-m...s-sdf-1-prometheus-hanger-elevator-1-72-scaleCreated at 1:72 scale for the same size as the VF-1 Valkyrie. (plane and figures not included)
Set is 29,4 cm wide, 14,5cm heigh and 28cm deep.
It can be printed at any other scale of course.
Kit contains
- Blender file for reference
- With finished coloured model.
- Exploded view of all the parts
- Building instructions
- BOM (showing all the print files, and number of printers per item needed)
- Assembly instructions
- Paint instructions
- STL, OBJ and 3MF files of all parts
- Decals for the letters of the hanger doors
This Kit is part of a larger set, these will be available shortly
If you send me a message I will send you the build instructions for free, so you can see what you need to create this set.
Massassi
Member
- Joined
- Aug 25, 2013
- Messages
- 82
Thanks
Similar threads
