The great pink Spitfire challenge

Pantherman · Jul 9, 2023

GEG64 said:
Camera and fuselage halves

Hi Gary, did the camera come with your eduard kit or have you scratch built it? Pantherman

Pantherman · Jul 9, 2023

GEG64 said:
And the pink has begun

I'm a little way off "pinking", got some serious catching up to do. Pantherman

GaryG64 · Jul 9, 2023

Pantherman said:
Hi Gary, did the camera come with your eduard kit or have you scratch built it? Pantherman

I scratch built it from parts off a 1/76 tank kit and a styrene rod.

GaryG64 · Jul 9, 2023

Pantherman said:
I'm a little way off "pinking", got some serious catching up to do. Pantherman

I have two pinks. Why? Because the AK brand took too long for delivery, (almost 2 weeks) and both came from Amazon.

So, I ordered the vallejo. Both are virtually the same shade. The AK is slightly darker, but it is hard to tell side-by-side. I'll be using Vallejo Air it's thin enough for the airbrush. The AK is thicker and I'm not good at thinning paints.

Pantherman · Jul 9, 2023

Pantherman said:
Here's where I'm at. Some assembly done, primed and base coated. Pantherman

Next installment. Got most of the cockpit sorted, just need to assemble it. Bit of touching up on the painting required. Hope to get a fair bit done after work next week in a bid to catch up with number one Spitfire assembler Gary. Pantherman

GaryG64 · Jul 9, 2023

Pantherman said:
Next installment. Got most of the cockpit sorted, just need to assemble it. Bit of touching up on the painting required. Hope to get a fair bit done after work next week in a bid to catch up with number one Spitfire assembler Gary. Pantherman

Too kind, brother.
Your build is looking great, of course.
This week I have Night duty, so the build will be a little slower. But it's not a race

I have one wheel well built.

Pantherman · Jul 9, 2023

Pantherman said:
Next installment. Got most of the cockpit sorted, just need to assemble it. Bit of touching up on the painting required. Hope to get a fair bit done after work next week in a bid to catch up with number one Spitfire assembler Gary. Pantherman

Couldn't sleep so decided to start a little PE. Pantherman

Pantherman · Jul 9, 2023

GEG64 said:
Too kind, brother.
Your build is looking great, of course.
This week I have Night duty, so the build will be a little slower. But it's not a race
I have one wheel well built.

Definitely not a race, need to get maximum fun out of this build. Pantherman

Pantherman · Jul 9, 2023

GEG64 said:
I scratch built it from parts off a 1/76 tank kit and a styrene rod.

I'm still toying with the idea of fitting a camera. The Tamiya set doesn't really allow for one but I would like to get somewhere near the actual recon Spitfire if I can. Any cool suggestions from my fellow forum helpers? Pantherman

GaryG64 · Jul 9, 2023

There is that little door on the port side. I cut out my door. You could drill a camera hole in that door, you also could do belly cams.

GaryG64 · Jul 9, 2023

I got a little more done. Did a little paint test. I'll paint black primer lines later.

GaryG64 · Jul 9, 2023

Did some pre shading. Either this eduard has a few gaps or it's me. Whatever the case I'm having to do some filling and patchwork. Maybe I'll name her Patches.

TimM63 · Jul 9, 2023

GEG64 said:
The cockpit. Several fiddly PE parts.

Very nice start. Do the Eduard kits come with the 3D decals?

GaryG64 · Jul 9, 2023

Golanthius said:
Very nice start. Do the Eduard kits come with the 3D decals?

Thank you.
No 3D decals for this kit.
The instrument panel was PE.

GaryG64 · Jul 10, 2023

Ok.Time for bed. Maybe more tomorrow.
Now I don't know how I'm going to cover the exhaust when I start painting the pink... pondering

TimM63 · Jul 10, 2023

GEG64 said:
Ok.Time for bed. Maybe more tomorrow.
Now I don't know how I'm going to cover the exhaust when I start painting the pink... pondering

Can you mask it as close as you can then detail brush around it.
I bought these brushes and they are perfect for small detail work.

https://www.micromark.com/30-0-Micro-Miniature-Paint-Brushes-set-of-4

Pantherman · Jul 10, 2023

GEG64 said:
There is that little door on the port side. I cut out my door. You could drill a camera hole in that door, you also could do belly cams.

Thanks Gary. Pantherman

TimM63 · Jul 10, 2023

I am enjoying watching the progress of these builds. Just sayin

GaryG64 · Jul 10, 2023

Golanthius said:
Can you mask it as close as you can then detail brush around it.
I bought these brushes and they are perfect for small detail work.

https://www.micromark.com/30-0-Micro-Miniature-Paint-Brushes-set-of-4

Those are awesome looking. Thanks!

Pantherman · Jul 10, 2023

Pantherman said:
Couldn't sleep so decided to start a little PE. Pantherman

Finally got the cockpit done and added my pilot. Just got to matt varnish it tomorrow and weather it on Wednesday hopefully.
Then I can start assembling the fuselage. Pantherman

The great pink Spitfire challenge

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Similar threads