Classic Airframes 1/48 Hawk III TRASHED

Bear43 · Sep 17, 2023

I finished with the engine. Painted the hub aluminum. The cylinders have a base of gunmetal topped with dark gull gray and then a black wash. Exhaust pipes were painted flat black then brushed with Tamiya rust powder. After that I attached the lower wings. Next step will be to fill a few more gaps and then hit it with primer to see where it stands before paint.

Bear43 · Sep 20, 2023

Upper wing is together, cleaned up and primed. Fuselage assembly had final filling done and is ready for primer. Slowly but surely it is coming together.

Bear43 · Sep 21, 2023

The fuselage assembly is in primer now. A little bit of smoothing in a couple spots and it will be ready for paint. Rather excited now. I am starting to see the light at the end of the tunnel on this kit.

Bear43 · Sep 21, 2023

Final bit tonight was test fitting the engine and cowl. As you can see the engine is on nicely with exhaust routed well. However..... the cowl that goes around the engine is too small.... by a lot. So, I have to get that fixed. I already glued styrene rod to the ends of one cowl half and will need to trim, shape and smooth it out. It's an adventure!

TimM63 · Sep 21, 2023

Bear43 said:
Final bit tonight was test fitting the engine and cowl. As you can see the engine is on nicely with exhaust routed well. However..... the cowl that goes around the engine is too small.... by a lot. So, I have to get that fixed. I already glued styrene rod to the ends of one cowl half and will need to trim, shape and smooth it out. It's an adventure!

That is looking really good.
I had the same issue with the cowl on the Staggerwing. I attempted to modify but elected to just leave it off.

Bear43 · Sep 22, 2023

From what I have read it seems to be a fairly common issue.

Bear43 · Sep 23, 2023

I finally got some paint on the upper wing. A few weeks back I bought a cordless airbrush to try out and it works pretty well. I am still learning to work with it but it did work okay on the first coat on the wing. I also have the engine cowl sized right but still need to finish smoothing it out.

GaryG64 · Oct 2, 2023

I thought I would like to build this, but wow, it looks difficult. But you're doing a great job!

Bear43 · Oct 2, 2023

It definitely requires a lot of patience to do. That's why I have had to take a couple breaks from it. It is quite tedious and time-consuming and starts to become more of a chore. Now that I'm getting close to finishing it I am getting a bit more excited about it.

Bear43 · Oct 27, 2023

The cowl on this thing is giving me fits. I have some sheets of styrene so I am going to try my hand making a cowl.

Bear43 · Oct 29, 2023

It has paint! I also attached the tail wheel and drop tank and am now working on the landing gear. I will finish off the top wing then and start attaching rigging. I'm saving mounting the engine and cowl for last.

TimM63 · Oct 29, 2023

Bear43 said:
It has paint! I also attached the tail wheel and drop tank and am now working on the landing gear. I will finish off the top wing then and start attaching rigging. I'm saving mounting the engine and cowl for last.

View attachment 108071

View attachment 108072

This is looking really good.

Bear43 · Oct 29, 2023

Thanks! It has been a ton of work.

Bear43 · Oct 31, 2023

This thing almost went in the trash last night. Trying to get the landing gear on is an ordeal. The landing gear is made of soft metal. Very soft metal. The main struts were bent every way but straight. I finally got most of the landing gear together but stopped for the night before I smashed the dang kit and trashed it. Very aggravating!

Bear43 · Nov 1, 2023

Slow and steady but getting there.

Pantherman · Nov 1, 2023

Bear43 said:
Slow and steady but getting there.

View attachment 108157

Nice. Pantherman

Bear43 · Nov 5, 2023

Almost done with the upper wing, just a couple more rigging lines to attach. On the closeup pic, that bottom pad to mount the N strut is badly molded and the "hole" is in the wrong place. This has been normal for this kit. It is a fight every step of the way. Also, be gentle with the rigging critiques, it is my first time trying to rig a biplane...lol

Bear43 · Nov 15, 2023

I have tried and tried and tried some more on this thing and I just can't continue with it. The white metal landing gear struts are so soft they won't support the weight of the kit without splaying out. That is the last straw for me. I know now that Classic Airframe kits are for people that are good at scratch building as that is the only way it can be assembled. I am throwing away this as the aggravation is just too much.

TimM63 · Nov 15, 2023

Bear43 said:
I have tried and tried and tried some more on this thing and I just can't continue with it. The white metal landing gear struts are so soft they won't support the weight of the kit without splaying out. That is the last straw for me. I know now that Classic Airframe kits are for people that are good at scratch building as that is the only way it can be assembled. I am throwing away this as the aggravation is just too much.

I've been there brother. It's aggravating to get so far on a kit then end up trashing it.
The next kit will be redemption.

BlackSheepTwoOneFour · Nov 15, 2023

Shoulda used a hammer….

Classic Airframes 1/48 Hawk III TRASHED

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads