Mikromir Fokker G-1

Mycatistypingthis · Nov 14, 2023

Mikromir made a beautiful version of the Fokker G1, a Dutch heavy fighter that was fielded in very limited numbers during the opening stages of WW2 https://www.scalemates.com/kits/mikromir-48-016-fokker-g-1a-3d--1417619

This kit has a few extra parts 3d printed, though the Mercuries from the set are good as well. It is a very complete set, and I'm debating how best to make everything visible.

This will be a review as much as a build.

My pace is akin to tectonic plates; very slow until I do several weeks worth in one cataclysmic weekend. I need a bit of a distraction after the cat my username is derived from passed away this weekend.

Bear43 · Nov 14, 2023

I am very sorry for the loss of your cat. It is so hard losing our furry friends. I hope this kit does give you a bit of distraction.

Mycatistypingthis · Nov 15, 2023

A few pictures of the kit: Good details, though not very deep. Toolmarks only in invisible places. Getting the position right does require some effort. Some flashing, but it's really thin. Instructions are clear. Clarity of the clear parts is passable, but I want to show the inside better than they natively do, so I'm probably going to make it cutaway.

Mycatistypingthis · Nov 15, 2023

Supervisor Aki agrees with the choice of box.

Mycatistypingthis · Nov 15, 2023

One extra thing, the instructions for the 3d printed engine are missing, and it's not a 1-1 replacement. I'm not sure how far to sand the engine mount down so it will fit flush. I'll contact MikroMir because I need to do this quite early in the process and if it isn't right it will look bad.
I have also put the parts in a different box, because this one has been confiscated.

Bear43 · Nov 15, 2023

Aki certainly looks like an attentive supervisor...lol

Mycatistypingthis · Nov 15, 2023

Bear43 said:
Aki certainly looks like an attentive supervisor...lol

Truly the best one. He's also a good " mrrr" button, every pet gets a new sound.

Though he has hopped onto my lap while I was glueing, leading me to chase after him after he got a model stuck to his tail.

Mycatistypingthis · Nov 17, 2023

No progress because I have a project culminating this weekend. I have promised myself two Quickboost sets if the migration is successful this weekend (seats with belts and guns, especially the rear gun).

Mycatistypingthis · Dec 4, 2023

Photoetch is a bit hard to work with, and the lack of centering structure is a bit of a pain.

I'm about halfway through the cockpit.

Mycatistypingthis · Dec 7, 2023

Cockpit is done for now. There are not many reference images I could find and they are mostly black and white, so it's interpretation. I painted the seat a different shade of brown to have the seatbelts stand out more and will do some extra cleanup. The weird flightstick is accurate.

I would say the seat and seatbelt that come with the kit are about equal to the resin one, so if you want to build this set, I wouldn't bother with them.

Mycatistypingthis · Dec 11, 2023

This side is glued in, and now I run into the lack of locator options. The other side does not fit and will take a lot of grinding.

Mycatistypingthis · Dec 13, 2023

I closed the cockpit after much grinding. I'll take pictures when I cleaned it up and fill the last gaps. I am really feeling the difference between a small scale production niche product and a big series popular kit.

Mycatistypingthis · Dec 18, 2023

I made some more interest in the bottom of the wheel wells and glued the booms to the hull. The other one will be an exposed engine.

Mycatistypingthis · Dec 19, 2023

I found some detailed drawings. Later than I would have liked, but they are here nonetheless. Useful reference for anyone wanting this. The top one is from a blueprint at Fokker itself.

Mycatistypingthis · Dec 20, 2023

I forgot the exhausts, and adding them was a bit exhausting. 5mm x 1.5mm miniscule things that needed to cleaned up before glueing them. Two per cylinder (36 in total), and I lost three to the floor gods that I tried to replace with wire. It isn't pretty, and I will have to find out how to replace it better.

I also made fuel supply from electrical wire for the exposed engine. Still needs some work, but I'm okay with the result.

Bear43 · Dec 20, 2023

It sure is looking nice.

Mycatistypingthis · Dec 20, 2023

Bear43 said:
It sure is looking nice.

Thank you!

The kit is a handful, but I do love this aircraft. I did not keep the windows open because of the thickness of the transparent windows and a bit of sloppy modeling/painting.

I am very close to the point where I need to do airbrushing.

Mikromir Fokker G-1

Mycatistypingthis

Active Member

Bear43

Well-Known Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Bear43

Well-Known Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Mycatistypingthis

Active Member

Bear43

Well-Known Member

Mycatistypingthis

Active Member

Similar threads

Latest posts