Reply to thread

Message

Okay. Let's see if I can remember the order of my pictures. I started with the nose of the airplane sprayed it with chipping fluid thinned with Mr color leveling fluid. I then went to clean my airbrush with lacquer thinner and it turned into goo. So then I sprayed xf1 on the nose and chipped it a little bit and it was really easy and fun. So I sprayed a coat of clear on the nose and I don't no why I didn't do this earlier but I asked my phone what to thin AK heavy chipping fluid with and it says you can use their thinner or water. So I felt real stupid and thinned it with water. And let it dry for 15 minutes and sprayed the bottom with xf19 Sky Gray and the top with x13 j a green. I'll probably maybe do a little chipping tonight but more than likely tomorrow

[ATTACH=full]143645[/ATTACH]

[ATTACH=full]143646[/ATTACH]

[ATTACH=full]143647[/ATTACH]

[ATTACH=full]143648[/ATTACH]

[ATTACH=full]143649[/ATTACH]

[ATTACH=full]143650[/ATTACH]

[ATTACH=full]143651[/ATTACH]

<blockquote data-quote="Rob" data-source="post: 250849" data-attributes="member: 21827">Okay. Let&#039;s see if I can remember the order of my pictures. I started with the nose of the airplane sprayed it with chipping fluid thinned with Mr color leveling fluid. I then went to clean my airbrush with lacquer thinner and it turned into goo. So then I sprayed xf1 on the nose and chipped it a little bit and it was really easy and fun. So I sprayed a coat of clear on the nose and I don&#039;t no why I didn&#039;t do this earlier but I asked my phone what to thin AK heavy chipping fluid with and it says you can use their thinner or water. So I felt real stupid and thinned it with water. And let it dry for 15 minutes and sprayed the bottom with xf19 Sky Gray and the top with x13 j a green. I&#039;ll probably maybe do a little chipping tonight but more than likely tomorrow[ATTACH=full]143645[/ATTACH][ATTACH=full]143646[/ATTACH][ATTACH=full]143647[/ATTACH][ATTACH=full]143648[/ATTACH][ATTACH=full]143649[/ATTACH][ATTACH=full]143650[/ATTACH][ATTACH=full]143651[/ATTACH]</blockquote>

[QUOTE="Rob, post: 250849, member: 21827"] Okay. Let's see if I can remember the order of my pictures. I started with the nose of the airplane sprayed it with chipping fluid thinned with Mr color leveling fluid. I then went to clean my airbrush with lacquer thinner and it turned into goo. So then I sprayed xf1 on the nose and chipped it a little bit and it was really easy and fun. So I sprayed a coat of clear on the nose and I don't no why I didn't do this earlier but I asked my phone what to thin AK heavy chipping fluid with and it says you can use their thinner or water. So I felt real stupid and thinned it with water. And let it dry for 15 minutes and sprayed the bottom with xf19 Sky Gray and the top with x13 j a green. I'll probably maybe do a little chipping tonight but more than likely tomorrow [ATTACH=full]143645[/ATTACH] [ATTACH=full]143646[/ATTACH] [ATTACH=full]143647[/ATTACH] [ATTACH=full]143648[/ATTACH] [ATTACH=full]143649[/ATTACH] [ATTACH=full]143650[/ATTACH] [ATTACH=full]143651[/ATTACH] [/QUOTE]

Verification