Reply to thread

Message

Thanks , John   ;D

I think the one I picked is working out now ..

Slow going , slowed down by dry-times   -- and my insane dogs ---

Here's the direction it's gone :

   The primary BiC tank and tail-piece are welded in   -- so she's off the work-jig for good .

   Out of dry-dock

[ATTACH=full]77410[/ATTACH]

I started construction of the upper BiC tank's strap .
   Simple construction   . 5 layers tape . sandwiched by .3mm poly . Solvent melted into singularity .
Shaped . puttied . shaped   .. .

[ATTACH=full]77411[/ATTACH] [ATTACH=full]77412[/ATTACH]
[ATTACH=full]77413[/ATTACH][ATTACH=full]77414[/ATTACH]

   Fat with putty
Obviously a ~~bit~~ lot longer on the grill   : ....   we'll check back later

   Once that secondary BiC tank is strapped in and hooked up with the lower one I can get the other tanks hooked to the manifold .
   This one looks better than it's phographing :

[ATTACH=full]77415[/ATTACH]
[ATTACH=full]77416[/ATTACH]
[ATTACH=full]77417[/ATTACH]

   .. and that valve head needs scuffing . & more fading

   The pics always show you when to frown   ;D


I need to play with the settings on this camera      Again . I'm thinking of sending my old Samsung Infuse to them for repair just to use the camera again . No kidding 8) . it rocked

   Anywaze   ---
Who cares ?    Right ?
:'( :'( :'(

I started on a pair of pig-tail power cords for the Shin-LampsTM :

   [ATTACH=full]77418[/ATTACH]
[ATTACH=full]77419[/ATTACH]

.. .and still pondering adding some -kinda-something at the base of the Shin-LampsTM

Merry Giving Night ,
   Uru

<blockquote data-quote="urumomo" data-source="post: 194721" data-attributes="member: 13239">Thanks&nbsp; , John&nbsp;&nbsp; ;D &nbsp; &nbsp; &nbsp; I think the one I picked is working out now&nbsp; .. &nbsp; Slow going&nbsp; &nbsp; ,&nbsp; slowed down by dry-times&nbsp;&nbsp; --&nbsp; and my insane dogs&nbsp; ---&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Here&#039;s the direction it&#039;s gone : &nbsp;&nbsp; The primary BiC tank and tail-piece are welded in&nbsp;&nbsp; -- so she&#039;s off the work-jig for good .&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Out of dry-dock&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; [ATTACH=full]77410[/ATTACH]&nbsp; &nbsp; I started construction of the upper BiC tank&#039;s strap&nbsp; .&nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Simple construction&nbsp;&nbsp; .&nbsp; &nbsp; &nbsp; &nbsp; 5 layers tape . sandwiched by .3mm poly .&nbsp; Solvent melted into singularity .&nbsp; Shaped . puttied . shaped&nbsp;&nbsp; .. .&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; [ATTACH=full]77411[/ATTACH]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; [ATTACH=full]77412[/ATTACH][ATTACH=full]77413[/ATTACH][ATTACH=full]77414[/ATTACH]&nbsp; &nbsp; &nbsp;&nbsp; Fat with putty &nbsp; Obviously a <s>bit</s> lot longer on the grill&nbsp;&nbsp; :<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />&nbsp; &nbsp; ....&nbsp;&nbsp; we&#039;ll check back later&nbsp; &nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite2" alt=";)" title="Wink&nbsp; &nbsp; ;)" loading="lazy" data-shortname=";)" />&nbsp; &nbsp;&nbsp; Once that secondary BiC tank is strapped in and hooked up with the lower one I can get the other tanks hooked to the manifold .&nbsp; &nbsp; &nbsp;&nbsp; This one looks better than it&#039;s phographing&nbsp; &nbsp; :&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; [ATTACH=full]77415[/ATTACH]&nbsp; [ATTACH=full]77416[/ATTACH]&nbsp;[ATTACH=full]77417[/ATTACH]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; .. and that valve head needs scuffing&nbsp; .&nbsp; &nbsp; &amp; more fading&nbsp;&nbsp; The pics always show you when to frown&nbsp;&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick Out Tongue&nbsp; &nbsp; :p" loading="lazy" data-shortname=":p" />&nbsp; ;D&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; I need to play with the settings on this camera&nbsp;&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick Out Tongue&nbsp; &nbsp; :p" loading="lazy" data-shortname=":p" /> <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick Out Tongue&nbsp; &nbsp; :p" loading="lazy" data-shortname=":p" />&nbsp; &nbsp; &nbsp; Again .&nbsp; &nbsp; I&#039;m thinking of sending my old Samsung Infuse to them for repair just to use the camera again&nbsp; &nbsp; . No kidding&nbsp; 8) . it rocked &nbsp;&nbsp; Anywaze&nbsp;&nbsp; --- &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Who cares ?&nbsp; &nbsp;&nbsp; Right ? &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; :&#039;( :&#039;( :&#039;(&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; I started on a pair of pig-tail power cords for the Shin-LampsTM :&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; [ATTACH=full]77418[/ATTACH]&nbsp;[ATTACH=full]77419[/ATTACH]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; ..&nbsp; .and still pondering adding some -kinda-something&nbsp; at the base of the Shin-LampsTM&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Merry Giving Night ,&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Uru</blockquote>

[QUOTE="urumomo, post: 194721, member: 13239"] Thanks , John ;D I think the one I picked is working out now .. Slow going , slowed down by dry-times -- and my insane dogs --- Here's the direction it's gone : The primary BiC tank and tail-piece are welded in -- so she's off the work-jig for good . Out of dry-dock [ATTACH=full]77410[/ATTACH] I started construction of the upper BiC tank's strap . Simple construction . 5 layers tape . sandwiched by .3mm poly . Solvent melted into singularity . Shaped . puttied . shaped .. . [ATTACH=full]77411[/ATTACH] [ATTACH=full]77412[/ATTACH] [ATTACH=full]77413[/ATTACH][ATTACH=full]77414[/ATTACH] Fat with putty Obviously a [s]bit[/s] lot longer on the grill ::) .... we'll check back later ;) Once that secondary BiC tank is strapped in and hooked up with the lower one I can get the other tanks hooked to the manifold . This one looks better than it's phographing : [ATTACH=full]77415[/ATTACH] [ATTACH=full]77416[/ATTACH] [ATTACH=full]77417[/ATTACH] .. and that valve head needs scuffing . & more fading The pics always show you when to frown :P ;D I need to play with the settings on this camera :P :P Again . I'm thinking of sending my old Samsung Infuse to them for repair just to use the camera again . No kidding 8) . it rocked Anywaze --- Who cares ? Right ? :'( :'( :'( I started on a pair of pig-tail power cords for the Shin-LampsTM : [ATTACH=full]77418[/ATTACH] [ATTACH=full]77419[/ATTACH] .. .and still pondering adding some -kinda-something at the base of the Shin-LampsTM Merry Giving Night , Uru [/QUOTE]

Verification