Reply to thread

Message

I recently switched to this putty pictured, I like it and yes the clean-up is quick. What I learned let it sit for days, and water cleanes it right up.

The question and I know the answer. Before painting, the best practice is to wash ..... soap & water (buzzer sounds!)

Thinking 1 thinner wash
2 Or some flat covering the putty & shoot the primer. I sand after primer so the coat of flat will have no bad effect on the finish.
Just some working shots
Timed this because I was impressed after I used it . Reading an earlier post asking the same question you have.
[ATTACH]117368[/ATTACH]

begin
[ATTACH]117369[/ATTACH]
7 minutes
[ATTACH]117370[/ATTACH]
including the cargo door
[ATTACH]117372[/ATTACH]

[ATTACH]117371[/ATTACH]

Both Areas still need some work........ 7 minutes of clean-ups shouts' No problem!

My
.02

<blockquote data-quote="Heavy 7" data-source="post: 230462" data-attributes="member: 21804">I recently switched to this putty pictured, I like it and yes the clean-up is quick. What I learned let it sit for days, and water cleanes it right up.The question and I know the answer. Before painting, the best practice is to wash ..... soap &amp; water (buzzer sounds!)Thinking 1 thinner wash&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 2 Or some flat covering the putty &amp; shoot the primer. I sand after primer so the coat of flat will have no bad effect on the finish. Just some working shots Timed this because I was impressed after I used it . Reading an earlier post asking the same question you have.[ATTACH]117368[/ATTACH]begin[ATTACH]117369[/ATTACH]7 minutes[ATTACH]117370[/ATTACH]including the cargo door[ATTACH]117372[/ATTACH][ATTACH]117371[/ATTACH]Both Areas still need some work........ 7 minutes of clean-ups shouts&#039; No problem!My.02</blockquote>

[QUOTE="Heavy 7, post: 230462, member: 21804"] I recently switched to this putty pictured, I like it and yes the clean-up is quick. What I learned let it sit for days, and water cleanes it right up. The question and I know the answer. Before painting, the best practice is to wash ..... soap & water (buzzer sounds!) Thinking 1 thinner wash 2 Or some flat covering the putty & shoot the primer. I sand after primer so the coat of flat will have no bad effect on the finish. Just some working shots Timed this because I was impressed after I used it . Reading an earlier post asking the same question you have. [ATTACH]117368[/ATTACH] begin [ATTACH]117369[/ATTACH] 7 minutes [ATTACH]117370[/ATTACH] including the cargo door [ATTACH]117372[/ATTACH] [ATTACH]117371[/ATTACH] Both Areas still need some work........ 7 minutes of clean-ups shouts' No problem! My .02 [/QUOTE]

Verification