Reply to thread

Message

Good day.
Update time.
It has been a busy couple of weeks and modeling sort of slowed.
I have been working on more of the skins for the secondary hull.

[ATTACH=full]81491[/ATTACH]

[ATTACH=full]81492[/ATTACH]

[ATTACH=full]81493[/ATTACH]

[ATTACH=full]81494[/ATTACH]

When installing skin 7, I found that the tab at the bottom did not cover the space created by the surrounding skins. So I cut this tab off and made my own piece to fill the gap.

[ATTACH=full]81495[/ATTACH]

Then moved forward towards closing the skin walls on the bottom of the secondary hull.

[ATTACH=full]81496[/ATTACH]

[ATTACH=full]81497[/ATTACH]

For the installation of the sensor dish, it was puzzling how this went together. Most of the images that were online did not give much detail to this area. Then I found some of the original drawings for the design of this ship and those answered a lot of questions.
The outside skin is now complete and moving on to the sensor dish area.

[ATTACH=full]81498[/ATTACH]

[ATTACH=full]81499[/ATTACH]

[ATTACH=full]81500[/ATTACH]

This part I'm taking slow and methodical, to get it right.

Thank you for following.
Questions and comments welcome.

Jim

<blockquote data-quote="Papermodder" data-source="post: 198783" data-attributes="member: 12832">Good day.Update time.It has been a busy couple of weeks and modeling sort of slowed.I have been working on more of the skins for the secondary hull.[ATTACH=full]81491[/ATTACH][ATTACH=full]81492[/ATTACH][ATTACH=full]81493[/ATTACH][ATTACH=full]81494[/ATTACH]When installing skin 7, I found that the tab at the bottom did not cover the space created by the surrounding skins. So I cut this tab off and made my own piece to fill the gap.[ATTACH=full]81495[/ATTACH]Then moved forward towards closing the skin walls on the bottom of the secondary hull.[ATTACH=full]81496[/ATTACH][ATTACH=full]81497[/ATTACH]For the installation of the sensor dish, it was puzzling how this went together. Most of the images that were online did not give much detail to this area. Then I found some of the original drawings for the design of this ship and those answered a lot of questions.The outside skin is now complete and moving on to the sensor dish area.[ATTACH=full]81498[/ATTACH][ATTACH=full]81499[/ATTACH][ATTACH=full]81500[/ATTACH]This part I&#039;m taking slow and methodical, to get it right.Thank you for following.Questions and comments welcome. &nbsp;Jim</blockquote>

[QUOTE="Papermodder, post: 198783, member: 12832"] Good day. Update time. It has been a busy couple of weeks and modeling sort of slowed. I have been working on more of the skins for the secondary hull. [ATTACH=full]81491[/ATTACH] [ATTACH=full]81492[/ATTACH] [ATTACH=full]81493[/ATTACH] [ATTACH=full]81494[/ATTACH] When installing skin 7, I found that the tab at the bottom did not cover the space created by the surrounding skins. So I cut this tab off and made my own piece to fill the gap. [ATTACH=full]81495[/ATTACH] Then moved forward towards closing the skin walls on the bottom of the secondary hull. [ATTACH=full]81496[/ATTACH] [ATTACH=full]81497[/ATTACH] For the installation of the sensor dish, it was puzzling how this went together. Most of the images that were online did not give much detail to this area. Then I found some of the original drawings for the design of this ship and those answered a lot of questions. The outside skin is now complete and moving on to the sensor dish area. [ATTACH=full]81498[/ATTACH] [ATTACH=full]81499[/ATTACH] [ATTACH=full]81500[/ATTACH] This part I'm taking slow and methodical, to get it right. Thank you for following. Questions and comments welcome. Jim [/QUOTE]

Verification