Reply to thread

Message

Good day all.
Spent the last couple of days finishing off the top skins of the secondary hull.

[ATTACH=full]81730[/ATTACH]

[ATTACH=full]81731[/ATTACH]

The shuttle bay doors, I've been working on for a while, while waiting for other things to dry. It was installed just before the next piece of the skin was installed.

[ATTACH=full]81732[/ATTACH]

With that piece in and the two filler pieces at the bottom in, that completes the skins for the secondary hull.

[ATTACH=full]81733[/ATTACH]

[ATTACH=full]81734[/ATTACH]

[ATTACH=full]81735[/ATTACH]

[ATTACH=full]81736[/ATTACH]

[ATTACH=full]81737[/ATTACH]

I decided to dry fit the secondary hull to the saucer section to see how they looked.

[ATTACH=full]81738[/ATTACH]

[ATTACH=full]81739[/ATTACH]

[ATTACH=full]81740[/ATTACH]

[ATTACH=full]81741[/ATTACH]

[ATTACH=full]81742[/ATTACH]

[ATTACH=full]81743[/ATTACH]

[ATTACH=full]81744[/ATTACH]

The secondary hull fits so tight that I may not glue them together. We'll see.

Now it's time to start onto the nacelles.

Thank you for following.
Comments and questions welcome.

Jim

<blockquote data-quote="Papermodder" data-source="post: 198954" data-attributes="member: 12832">Good day all.Spent the last couple of days finishing off the top skins of the secondary hull.[ATTACH=full]81730[/ATTACH][ATTACH=full]81731[/ATTACH]The shuttle bay doors, I&#039;ve been working on for a while, while waiting for other things to dry. It was installed just before the next piece of the skin was installed.[ATTACH=full]81732[/ATTACH]With that piece in and the two filler pieces at the bottom in, that completes the skins for the secondary hull.[ATTACH=full]81733[/ATTACH][ATTACH=full]81734[/ATTACH][ATTACH=full]81735[/ATTACH][ATTACH=full]81736[/ATTACH][ATTACH=full]81737[/ATTACH]I decided to dry fit the secondary hull to the saucer section to see how they looked.[ATTACH=full]81738[/ATTACH][ATTACH=full]81739[/ATTACH][ATTACH=full]81740[/ATTACH][ATTACH=full]81741[/ATTACH][ATTACH=full]81742[/ATTACH][ATTACH=full]81743[/ATTACH][ATTACH=full]81744[/ATTACH]The secondary hull fits so tight that I may not glue them together. We&#039;ll see.Now it&#039;s time to start onto the nacelles.Thank you for following.Comments and questions welcome. &nbsp;Jim</blockquote>

[QUOTE="Papermodder, post: 198954, member: 12832"] Good day all. Spent the last couple of days finishing off the top skins of the secondary hull. [ATTACH=full]81730[/ATTACH] [ATTACH=full]81731[/ATTACH] The shuttle bay doors, I've been working on for a while, while waiting for other things to dry. It was installed just before the next piece of the skin was installed. [ATTACH=full]81732[/ATTACH] With that piece in and the two filler pieces at the bottom in, that completes the skins for the secondary hull. [ATTACH=full]81733[/ATTACH] [ATTACH=full]81734[/ATTACH] [ATTACH=full]81735[/ATTACH] [ATTACH=full]81736[/ATTACH] [ATTACH=full]81737[/ATTACH] I decided to dry fit the secondary hull to the saucer section to see how they looked. [ATTACH=full]81738[/ATTACH] [ATTACH=full]81739[/ATTACH] [ATTACH=full]81740[/ATTACH] [ATTACH=full]81741[/ATTACH] [ATTACH=full]81742[/ATTACH] [ATTACH=full]81743[/ATTACH] [ATTACH=full]81744[/ATTACH] The secondary hull fits so tight that I may not glue them together. We'll see. Now it's time to start onto the nacelles. Thank you for following. Comments and questions welcome. Jim [/QUOTE]

Verification