Moebius's Viper they can't call an "egg".

Eagle-1 · Mar 1, 2024

As I mentioned in the "Let me EGG-splain" thread of the Y (Yolk)-Wing fighter from Star Wars I've started, that came with a Cylon Raider I purchased from the new series of Battlestar Galactica. It's a Moebius "Super-Deformed" Mark II Viper. (They couldn't call it an "egg" because Hasegawa has that line) but is most certainly an egg type model. I bought the Raider to fight with this:

Here's what you get in the box:

As per my usual, I plan to modify this a little to add some details from the Viper from the show. It'll still be an egg, show it will never be 100%, but I hope look a little better on display.

Rob.

Eagle-1 · Mar 1, 2024

Here's more what I wanted this one to resemble:

I started out by modifying the wings just a tad. They needed a little reshaping and some material added here and there. The guns didn't line up exactly like they are on the show Viper, so some alignment had to be tweaked as well, so I removed the lasers.

Here's that effort:

Original box wings:

My hacked up wings:

They way they was:

They way the will be:

I think they came out alright?

Rob.

Eagle-1 · Mar 1, 2024

Next, lookin' down the sucky-inny part of the intakes, they are much more recessed on the show thatn this model, so I gave 'em a little more scoop.

Stock:

More scoop. I also added that little pointy nub thingy.

Although barely noticable, I gave each blade an angle that they didn't have before.

Moving right along.

Rob.

Eagle-1 · Mar 1, 2024

There is a much more recessed engine hole with a fair amount of detail inside that looks nice on the show Viper. Wanting to add some of that later, I removed the original section so that I could fix something in there later. That hole is in a little different place on the show Viper, so I adjusted that too. Also here, you can see I've removed the engine vane ring so that I can help those out later too.

Rob.

Eagle-1 · Mar 1, 2024

The nose needed some help too. On the show Viper, it's more open and those indentions surrounding it aren't present, so I did that to the model part.

Stock:

After a couple hours of drillin', whittlin', fillin' and strip addin':

Now it can breath through it's nose!

Rob.

Eagle-1 · Mar 1, 2024

Getting ready to start putting left and right sections together, I, as a rule, usually remove any locater pins and nubs. It helps me get a perfect alignment and I hear folks mention how bad these usually are, so I always get rid of them:

Rob.

Eagle-1 · Mar 1, 2024

Aligning the two halves of the fuselage, the ramp running down the front of the nose needed to be taken way down to match the studio:

So, I lowered it:

I hated to do it, but sometimes you gotta break some eggs.

Rob.

Eagle-1 · Mar 1, 2024

The tail fin didn't match a "real" Viper neither.

Added a few bits of styrene and spot/glaze putty for more holes that ain't there and had to do some sanding and smoothing.

Closer to what's needed here I think.

Rob.

Eagle-1 · Mar 1, 2024

Next up was the rear section and engine cans.

Stock:

There is a fair amount of doodlies and grubicles on the studio Viper that I wanted to add, so this had to come apart so I could check the rings and valve lashes and see if I can get more compression!

Biggest mods so far:

This oughta work?

As can be seen in a couple of those last pictures, along with the cans, I have had to modify most of the back end. I will also be adding some depth back here seen in the show too, so the end section had to be carved out.

Rob.

Eagle-1 · Mar 1, 2024

As one of the last things I've done before taking a break from this, the canopy was solid in the kit and I want it open with some clear windows, so I had to do more cuttin'. In these last couple shots, I have also removed the material from the upper intake and I'll be fitting some more appropriate mesh type stuff.

Now, I'm thinkin' all this will look better and even though still an "egg" build, if nothing else, it will end up better on display than box stock. Opinions, comments and critique are always welcome for whatever I'm doing, so y'all speak up.

This is where I'm at on this one. There may not be many who have seen this particular kit as many have said they've never even heard of it, but if anyone has, please drop what you've done to your build in here. It all helps!

Rob.

blakeh1 · Mar 1, 2024

Those mods are superb!

Eagle-1 · Mar 1, 2024

Thank you Mr. blakeh1!

Nah. Just shootin' from the hip. As with most of my builds, I generally figure sumthin' out I wanted to do just after the glue sets.

Or, just after I post a picture.

Rob.

TimM63 · Mar 1, 2024

Eagle-1 said:
As one of the last things I've done before taking a break from this, the canopy was solid in the kit and I want it open with some clear windows, so I had to do more cuttin'. In these last couple shots, I have also removed the material from the upper intake and I'll be fitting some more appropriate mesh type stuff.

View attachment 114486
View attachment 114487
View attachment 114488

Now, I'm thinkin' all this will look better and even though still an "egg" build, if nothing else, it will end up better on display than box stock. Opinions, comments and critique are always welcome for whatever I'm doing, so y'all speak up.

This is where I'm at on this one. There may not be many who have seen this particular kit as many have said they've never even heard of it, but if anyone has, please drop what you've done to your build in here. It all helps!

Rob.

I like the mods. Really good work.

Down Time · Mar 2, 2024

Lookin' good there Mr. Rob

Eagle-1 · Mar 2, 2024

Golanthius said:
I like the mods. Really good work.

Down Time said:
Lookin' good there Mr. Rob

Thank you y'all!

"Mr." Down Time? Ok. Sir.

Rob.

Bear43 · Mar 2, 2024

You have some serious skills, Rob.

Eagle-1 · Mar 2, 2024

Bear43 said:
You have some serious skills, Rob.

Thank you very much, but I don't remember you ever seeing me dance?

Rob.

Eagle-1 · Mar 4, 2024

Alright y'all...

As I said a day or two ago, after I posted some of what I was doing to this build, I got to looking at it and decided to do a little more doo-dags and snubly nub addin'. This is y'all's fault, this thing was tucked away where it's been for some time now and I figured it was time.

Just to catch up a little, here's a couple I never posted from earlier before I put this on the side for awhile:

Those are actually where it was last time I worked on it.

On a couple of the pictures I saw, There are some kinda holes on the bottom? Possibly vent holes? Trash ejectors for gum wrapper type things? Poo? I don't know, but I like 'em and added 'em'

I have to make another post, there is a 10 picture limit.

Rob.

Eagle-1 · Mar 4, 2024

This update, I needed to concentrate on the back/rear end on that section all up in between the engines. Doing a little searching, I found a couple different arrangements back there, but I chose this one:

Why I chose that one to go by, I don't know, but it's too late now. Even going with that one, I didn't stick 100% to what we can almost see there. Using that though, I cobbled this together. Again, the stock rear as it comes outta the box:

Here's my interpretation of that:

If anything looks janky or loose or looks like it may be falling off, it very well may. I've very loosely glued it together (to be able to pop it all back apart) so that I could take pictures and posted these for y'all to check out and give me some feedback/critique/criticisms/comments and suggestions of any kind. It's getting close, but I could still change/modify whatever y'all come up with I oughta, so hollar!

Rob.

Pantherman · Mar 4, 2024

Eagle-1 said:
This update, I needed to concentrate on the back/rear end on that section all up in between the engines. Doing a little searching, I found a couple different arrangements back there, but I chose this one:

View attachment 114564

Why I chose that one to go by, I don't know, but it's too late now. Even going with that one, I didn't stick 100% to what we can almost see there. Using that though, I cobbled this together. Again, the stock rear as it comes outta the box:

View attachment 114565

Here's my interpretation of that:

View attachment 114566
View attachment 114567
View attachment 114568
View attachment 114569

If anything looks janky or loose or looks like it may be falling off, it very well may. I've very loosely glued it together (to be able to pop it all back apart) so that I could take pictures and posted these for y'all to check out and give me some feedback/critique/criticisms/comments and suggestions of any kind. It's getting close, but I could still change/modify whatever y'all come up with I oughta, so hollar!

Rob.

I am liking this build alot, can't wait to see the next installment. Pantherman

Moebius's Viper they can't call an "egg".

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads