Armored Core - SUNSHINE-L

Well this is pretty damn good! Love seeing all the steps, got me thinking about trying on of these.
 
Thanks , man .
I've been picking at the base ,
I spot applied matte varnish and covered it with pastel dust and bits , let it dry and brush off the excess - repeat :

2TcERq0.jpg

A big part of that surface , at least half , gets covered up by the slabs and more rubble .
I'm using cardboard to experiment with to arrive at the right size and shape for the slabs , prior to cutting the cores out of the 5/32 plywood .
I had them a bit larger and now they're too small .

His left foot will be farther outboard and forward than shown below .
I was trying to take some better pix but attempting to pose him atop these loose pieces of cardboard that are balanced atop those loose , beveled dowel segments - all the while his hip , torso and arm joints are moving around and changing his center of gravity - was kinda unfun .
But , you can get the gist of where this is heading :

jwDPpbl.jpg
WwI2Ff7.jpg
6sCd3xy.jpg
 
Oh yeah, having the rubble angled like that really adds a lot of interest to the pose, adds a sense of weight and energy to the figure. Nicely done!
 
OK ,
Here's the plywood cores . Sealed with several coats of oil based wood stain to prevent any possible movement ( warping ) from absorbing water from the plaster application .
Probably wouldn't since they're so small , but , I'd rather not find out :

dDxCutV.jpg



The feet will be anchored in position using 2mm brass rods that run all the way into the plinth to fix the slabs in their proper orientation :

GIOpn92.jpg


The left foot needed only a hole drilled in the " heel " since that is a solid piece of plastic ,
but the right foot required a sleeve to be cemented in since that is a hollow section .


I capped the end of this section of 3mm styrene tube with .25mm styrene , and inserted it the hole filled with a generous supply of styrene heavy solvent cement ( polystyrene dissolved in butyl acetate ) .
Then left the foot clamped atop the slab core with the brass rod inserted into the slab so it would be exactly perpendicular when it cured .
I used the drill press to drill all the holes so the feet sit exactly flat .

The hole for it is right up against the aft bulkhead of that forward foot section so it has plenty of material to bond to :

B8UCfLt.jpg
ENPXdVD.jpg


Gypsum plaster applied , using a stick of 2mm styrene rod and a piece of 3/8 inch tubing to protect the holes :

u4IXtC1.jpg

Sanded to a uniform thickness ,, kinda :

A4h03RL.jpg


I'm doing the edges last so I have the plywood as a visual reference for the plaster depth .
After the top and underside of each is done , I'll plaster the edges and then drill and insert the " rebar " .
Some chunks of " concrete " will be added to the exposed rebar .

Then after these are painted they can be permanently attached , the center holes filled and the surrounding rubble and damaged steel beams ( probably ) added to hide the dowel sections and tie everything together .
 
So the next couple of days I'm going to experiment with these products below .
I'm using an acrylic for the slab edges to preclude cracking / delamination issues I will run into while drilling and mounting all the rebar through the edges if I were to cover the edges with gypsum plaster like the upper and lower faces .

Hopefully I can achieve the right texture to mimic the exposed aggregate of the broken cross section .
I'll incorporate the various powders and/or texture the surface with a brush -- we'll see how it goes .

Being this is 1/72 scale , the texture must be minimal but convincing .
I'm wondering if using the different colors of the embossing powders will telegraph thru a translucent application of a color coat and mimic the appearance of aggregate in the concrete .

I bought these AK terrains years ago to check them out . Still unopened . :D Time to crack the lids .

vIX9vMI.jpg



Years , and years , ago I ordered this " concrete paste " , below , from Hobby Link Japan just to see what it was .
It looked odd and it kinda is .
It's acrylic medium ,plus most likely calcium carbonate filler , pigmented that odd blue . ( from MiG )
Basically blue plastic putty . Nothing special .

Concrete is a huge part of my professional existence and like a not-small portion of the Earth's population I've been surrounded by concrete infrastructure my entire life .
I have never seen concrete " aged " into being this color .
Never seen concrete anywhere close to this color . " aged " concrete is dirty concrete , lol .
White Portland cement , white sand and funky-blue pigment colorant ? sure .

Gonna experiment with it along with the others .

Pu87Lcv.jpg
 
So the next couple of days I'm going to experiment with these products below .
I'm using an acrylic for the slab edges to preclude cracking / delamination issues I will run into while drilling and mounting all the rebar through the edges if I were to cover the edges with gypsum plaster like the upper and lower faces .

Hopefully I can achieve the right texture to mimic the exposed aggregate of the broken cross section .
I'll incorporate the various powders and/or texture the surface with a brush -- we'll see how it goes .

Being this is 1/72 scale , the texture must be minimal but convincing .
I'm wondering if using the different colors of the embossing powders will telegraph thru a translucent application of a color coat and mimic the appearance of aggregate in the concrete .

I bought these AK terrains years ago to check them out . Still unopened . :D Time to crack the lids .

vIX9vMI.jpg



Years , and years , ago I ordered this " concrete paste " , below , from Hobby Link Japan just to see what it was .
It looked odd and it kinda is .
It's acrylic medium ,plus most likely calcium carbonate filler , pigmented that odd blue . ( from MiG )
Basically blue plastic putty . Nothing special .

Concrete is a huge part of my professional existence and like a not-small portion of the Earth's population I've been surrounded by concrete infrastructure my entire life .
I have never seen concrete " aged " into being this color .
Never seen concrete anywhere close to this color . " aged " concrete is dirty concrete , lol .
White Portland cement , white sand and funky-blue pigment colorant ? sure .

Gonna experiment with it along with the others .

View attachment 93796
Poured a few hundred metres of concrete over the year's and never seen a blue one!!
Pantherman
 
That was the main reason I ordered , I think .
" what do you mean 'aged blue ' ? " , lol
It's just acrylic plastic putty .
I have no idea who at MiG thought they remember seeing blue concrete somewhere .
 
That was the main reason I ordered , I think .
" what do you mean 'aged blue ' ? " , lol
It's just acrylic plastic putty .
I have no idea who at MiG thought they remember seeing blue concrete somewhere .
Think I have found your next build!
Pantherman
 

Attachments

  • Screenshot_20220925-212519_Google.jpg
    Screenshot_20220925-212519_Google.jpg
    74.4 KB · Views: 1
Color of the truck denotes the color of the mix ?
Quite handy !
 
Last edited:
Color of the truck demotes the color of the mix ?
Quite handy !
If that's the case then I must have built some multicoloured structures in my time. Maybe that's why concrete is grey because all the trucks that have turned up are usually covered in mud and grime!!!!
Pantherman
 
Micro-Mark , Foam Clay
Then overtopped with drywall mud and sanded to match .
Then I need to modify the straight lines along the breaks for the main slab to make sense -- I started with straight lines to make it easier to layout and drill for the rebar grid

DSC06338.JPGDSC06337.JPGDSC06341.JPG
 

Latest posts

Back
Top