Meng HMS HOOD toon

BarleyBop · 2025-02-11T22:37:10-0500

Got all fired up watching the group build, so picked up my first ship! Not serious enough to float with those others, but should be fun.

Parts are on sprues, so thank goodness for precision cutters to clean up the cuts after rough cutting!
Press fit, gluing some seams because I'm thinking of painting, though it looks pretty clean with the colored parts...

BarleyBop · 2025-02-11T23:05:31-0500

Rough cut:

Fine cut with single blade. Perfect if the sprue attachment point is backed off one side and flush on the other. The blade glides against the part on the side that had a bit of reveal, and slices down with the piece held by the flat jaw of the cutter

Most of the time, no filing, clean up with an knife or sanding required:

Unfortunately, because the cutter is 'right-handed', i can't use it in every situation.

For those other situations where right handed access isn't possible, or the cut is against a rounded edge, or the attachment point is in the middle of a part, doubled bladed cutters work well.
Not quite as clean, but requiring minimal clean up.

Eagle-1 · 2025-02-11T23:26:41-0500

Toon kits?

Never heard of 'em. Must be somethin' new.

Rob.

BarleyBop · 2025-02-11T23:48:11-0500

Eagle-1 said:
Toon kits?

Never heard of 'em. Must be somethin' new.

Rob.

I hadn't either, but apparently been around some time.

If you search 'toon' or 'egg' in the main forum search, you can see other 'caricature' kits folks have built or have in their stash!
Planes, Armour, Ships!

A bit of fun when your main build needs a break!

TimM63 · 2025-02-12T00:07:26-0500

Eagle-1 said:
Toon kits?

Never heard of 'em. Must be somethin' new.

Rob.

I told my wife it was your fault I was buying egg planes and toon tanks. LOL.

OldManModeler · 2025-02-12T01:12:02-0500

The PE on that kit must be over the top!

Be well. Model Fun.

Eric

BarleyBop · 2025-02-12T09:21:00-0500

TimM63 said:
your fault

Our duty to be of service.
Band of brothers.
"It is the Way".

TimM63 · 2025-02-12T09:21:45-0500

I picked this one up not too long ago. Should be a fun little kit.

BarleyBop · 2025-02-12T09:32:14-0500

TimM63 said:
I picked this one up

Eagle-1 said:
Never heard of 'em

Hahaha! I gotta stop posting after my bedtime!
Never connected the dots... D'uh!

BarleyBop · 2025-02-12T09:49:48-0500

Happy little kit, but great example of a pet peeve.
Why do manufacturers insist on sprue attachment points that cross over surfaces that should be flat? A pain to cut, a pain to clean up.
I know, I know, necessary part of the molding process, but really?

TimM63 · 2025-02-12T10:31:24-0500

BarleyBop said:
Happy little kit, but great example of a pet peeve.
Why do manufacturers insist on sprue attachment points that cross over surfaces that should be flat? A pain to cut, a pain to clean up.
I know, I know, necessary part of the molding process, but really?

View attachment 137746

I agree. They could put them on the sides and not on mating surfaces. I hate cleaning those up.

Meng HMS HOOD toon

BarleyBop

Well-Known Member

BarleyBop

Well-Known Member

Eagle-1

Well-Known Member

BarleyBop

Well-Known Member

TimM63

Well-Known Member

OldManModeler

Well-Known Member

BarleyBop

Well-Known Member

TimM63

Well-Known Member

BarleyBop

Well-Known Member

BarleyBop

Well-Known Member

TimM63

Well-Known Member

Similar threads

Latest posts