Edbert
Well-Known Member
- Joined
- May 16, 2024
- Messages
- 282
Next kit in line, as I take a time-out on the Corsair. Less than 25% as many parts to make the cockpit, my custom mixed interior green is too much USAAF, but I'm not part of that crew that cares.
![1718151409363.png 1718151409363.png](https://data.www.scalemodeladdict.com/attachments/105/105109-f6ac3419fe4da6316576c6e1ed2dcc32.jpg)
I was a bit amazed at how few parts were in this kit, after just working on a WWII plane with 330+ parts jaded me. But these components fit together without putty, like a dream.
![1718151381856.png 1718151381856.png](https://data.www.scalemodeladdict.com/attachments/105/105108-267a2f05dd5a873e74a84500b5f452d5.jpg)
Here it is with a layer of 1500 surfacer. Those two ridges, just inboards of the Hispanos, they are staying.
![1718151447805.png 1718151447805.png](https://data.www.scalemodeladdict.com/attachments/105/105110-f8214c8c1c749066c0681fd09152e4e0.jpg)
I found several places that needed attention. You can see the two shiny blobs by the cannons. I trimmed the lower wings after cutting them from the sprue, did not realize the blobs I trimmed off were the underside of the sponsons, or whatever they are called. So I had to fill those gaps and I'm hating putty, either CA or sprue-glue.
![1718151489848.png 1718151489848.png](https://data.www.scalemodeladdict.com/attachments/105/105111-0b54733bd3769a0ab25bfb6551561a57.jpg)
Was able to get the two dimples out with CA as a filler.
![1718151530268.png 1718151530268.png](https://data.www.scalemodeladdict.com/attachments/105/105112-8ced917225c32702ed1e0c72f3e65fbc.jpg)
Pre-shading, either my Testors Model Master enamel was tooo thick or I had too much pressure. But since this is undercoating, I didn't worry.
![1718151570643.png 1718151570643.png](https://data.www.scalemodeladdict.com/attachments/105/105113-c8ec67d94d7bad1921fea9a73ff6179a.jpg)
I'm not happy withy the feul cap sitting wonky, but too late, and I did get the dimples out.
![1718151599180.png 1718151599180.png](https://data.www.scalemodeladdict.com/attachments/105/105114-a1388f6c15a01f6376f98dfdbde263dc.jpg)
![1718151409363.png 1718151409363.png](https://data.www.scalemodeladdict.com/attachments/105/105109-f6ac3419fe4da6316576c6e1ed2dcc32.jpg)
I was a bit amazed at how few parts were in this kit, after just working on a WWII plane with 330+ parts jaded me. But these components fit together without putty, like a dream.
![1718151381856.png 1718151381856.png](https://data.www.scalemodeladdict.com/attachments/105/105108-267a2f05dd5a873e74a84500b5f452d5.jpg)
Here it is with a layer of 1500 surfacer. Those two ridges, just inboards of the Hispanos, they are staying.
![1718151447805.png 1718151447805.png](https://data.www.scalemodeladdict.com/attachments/105/105110-f8214c8c1c749066c0681fd09152e4e0.jpg)
I found several places that needed attention. You can see the two shiny blobs by the cannons. I trimmed the lower wings after cutting them from the sprue, did not realize the blobs I trimmed off were the underside of the sponsons, or whatever they are called. So I had to fill those gaps and I'm hating putty, either CA or sprue-glue.
![1718151489848.png 1718151489848.png](https://data.www.scalemodeladdict.com/attachments/105/105111-0b54733bd3769a0ab25bfb6551561a57.jpg)
Was able to get the two dimples out with CA as a filler.
![1718151530268.png 1718151530268.png](https://data.www.scalemodeladdict.com/attachments/105/105112-8ced917225c32702ed1e0c72f3e65fbc.jpg)
Pre-shading, either my Testors Model Master enamel was tooo thick or I had too much pressure. But since this is undercoating, I didn't worry.
![1718151570643.png 1718151570643.png](https://data.www.scalemodeladdict.com/attachments/105/105113-c8ec67d94d7bad1921fea9a73ff6179a.jpg)
I'm not happy withy the feul cap sitting wonky, but too late, and I did get the dimples out.
![1718151599180.png 1718151599180.png](https://data.www.scalemodeladdict.com/attachments/105/105114-a1388f6c15a01f6376f98dfdbde263dc.jpg)