Meng War Toons Kelly's Heroes

[airdave]

I am a member at another forum that focuses on tooned models, mainly kustom car plastic kits
but any 'toon subject is acceptable fare, and in any medium.

These guys do a lot of kit bashing to create wilder looking subjects.
I got there because I have some toon paper models that I have created.

A few months back they started another build contest, this one called Back to Basics.
Basically meaning, you build something straight out of the box with no real modifications to the kit itself.
Although the rules do allow for basic putty (seam filling, etc)
and paint work of any kind.
They even suggest creating a cardboard base or backdrop, and making other accessories.

This got me interested because I wanted to try building one or two of the Meng War Toons Tank models.
I already had the idea to create a scene from one of my favorite war movies Kelly's Heroes.
And my paper building skills might help with a display base.

Sure enough, Meng has a tooned Sherman and a tooned Tiger tank!
No, they aren't exactly the same versions of tanks as in the movie.
(Actually the Tigers in the film are plywood mockups over top of Russian tanks...but done quite well)
But I don't think any of this matters since I am doing a cartooned rendition of both tanks.

I am pretty far along in the build now, since the deadline for the contest is the end of April.
But I will catch you up on my progress so far.

These are the two kits I purchased.
FYI bought on ebay, from extremely friendly and communicative Chinese sellers.
Not only were the kits cheap (about $20 each) they included free shipping, and I got the first kit in only 2 weeks.
Second one took another 10 days or so.
Pretty good for free shipping from China to Canada!

 

[airdave]

So I started with the Sherman...

must say, totally impressed with the kit itself.
Great packaging, impressive looking assembly booklet, and the detail on the parts is amazing.
No flash anywhere that I can see.

Starting with the lower hull and wheels/suspension.
Everything actually snaps together without glue, but I tried to glue everything to be sure.
I am going to avoid putty since the fit of everything is pretty darned good.
Some seams look natural to the tank, and others are reduced with sanding of the edges for a tighter fit.



.......................
Lower hull completed....I will leave the track off for now (for painting).
Wheels are mounted on spindles and do spin freely.
Track actually revolves nicely.

Starting on clean up of the upper hull.

 

[airdave]

I assembled the turret which (I think) was 4 parts plus the gun barrel.
There is a mantel cover aswell (shown).
Once again, everything fits well, and without glue, but I sanded for better fit and used glue.
Then I sanded exteriors.

Lots of surface extras - antenna, hatches, lights and guard rails, etc
One of the light guards was damaged in the box, so I molded a fix.

The turret fits using a keyway, so it locks to the hull, but still pivots nicely.
The Gun barrel elevates slightly.
Ready for paint at this point.

 

[airdave]

I mixed up a blend of aluminium and some transparent black.
Created a sort of gun metal colour and dry brushed the rubber tracks.




.........................
For paint, I started with a gray green faded colour, much like what the Sherman's in the movie are.
I've done some dry brushing of a faded white on upper surfaces,
and black on lower surfaces.
I also did a bit of spattering with the black.
Before I stenciled the stars, I used a pre-cut "random spatter" stencil to apply some slightly darker green colour here and there on the hull.
I'm trying to recreate the varied staining seen on the tanks.
I'll keep working at it.

Let me show you the Tiger assembly next.

 

[locomotive]

Looks fun.

 

[MattG]

I always thought these toon models looked like fun. Great work on it!

 

[TimM63]

I just did one of these. I really enjoyed it.

 

[airdave]

So now the Tiger build...
the kit comes with a lot more parts than the Sherman.
Most of that is the rolling wheels, of which there are 4 for each side.
(Plus the front support wheels and rear drive cogs)
Each wheel has an inner and outer part, plus a small neoprene (hidden inside) bushing.

Tracks are the same black rubber style, to which I did the same dry rub silverish.

Once again, everything snaps together easily and very securely.
There is very little clean up required, but I still tried to smooth out mating surfaces,
and I did some outer scuffing with scotchpads.

Lower hull is one large piece this time, with two side hull plates that have the axle stubs.

Each wheel pushes onto an axle with those neoprene bushings providing the connection.
From there the wheels spin freely.
Fitting the wheels is a small challenge since every wheel has to be installed at the same moment.
They must all be grouped into place and then pushed onto all 6 axles at once!
It's a really tight fit.

 

[BarleyBop]

I assembled...

View attachment 142177

I laughed, not at the build, but the tiny toon tank just makes me giggle! Don't know how you can keep it together while you put it together!

 

[Edbert]

I think you're missing a few road-wheels or bogies there!

Oh wait...nevermind

 

[airdave]

Next I prepared the upper hull for the Tiger.
It is nicely molded with plenty of details.
It also has a few small surface attachments, most notable is the forward machinegun.
It is made up of three parts, and the gun does swivel, albeit only slightly.

The rear of the hull is a separate plate that can be fitted before or after the upper hull part.
There are exhaust and exhaust covers to attach, along with the two track guards.

The upper snaps onto the lower hull with much gusto and solidity.
It is very secure with no glue.






and

 

[BarleyBop]

nicely molded with plenty of details

Ha! Even Toons of german tanks overengineered by comparison!

 

[warspite]

There is a modification kit available from a French company, Retrokit. Is is designed to fit over the Meng T-34 for a very close approximate of the Kelly's Heroes Tiger-34. I am waiting for Meng to bring out a proper Sherman M4A3 version to make Oddball's tank.

I have kitbashed my own Tiger-34 in 1/35th scale,

 

[Jakko]

I was about to say: You should really get a toon T-34 and graft its wheels to the Tiger

 

[airdave]

I like the Kelly's Heroes Meng mod, but it's not a toon version - and that's really the point with this one.
Or so I keep telling myself as I struggle to realistically paint and weather my toon models!
More on that later.

...
Next is the Tiger turret.
Five parts (as shown) and the swivel on the gun barrel is a bit more than the Sherman.
I really love the short fat barrel!

Plus, the top plate...which is the first fit I don't like.
The top plate is located by four tabs sticking up from the sides of the turret.
When securely in place, there is a seam all the way around the turret (that's fine(
but it is broken by these four interlocking tabs.
I tried sanding everything smoother in an attempt to hide these tabs,
but it will require putty to do so - something I decided I was not going to do.

So, I'm living with it.
Only a minor issue with this build.








.............................
The turret fits to the hull in the same manner as the Sherman, with two locating tabs that lock it to the hull.
It swivels tightly but smoothly.

You will also notice I have attached all the detail parts to the Turret...there's quite a few parts, including hatch details and the flare pots.
Next up is paint.

 

[airdave]

After completing the Tiger, the first thing I noticed was the drastic size difference to the Sherman.
I get that the Tiger was a much larger tank, but the toon comparison is really comical.

When you view the tanks side by side, the width of the Tiger is really funny.
Or is it the narrowness of the Sherm? lol






Only thing left right now, is to paint the Tiger black.

 

[BarleyBop]

"Hey Spike! Spikes my hero!"

 

[warspite]

I like the Kelly's Heroes Meng mod, but it's not a toon version - and that's really the point with this one.
Or so I keep telling myself as I struggle to realistically paint and weather my toon models!
More on that later.

...
Next is the Tiger turret.
Five parts (as shown) and the swivel on the gun barrel is a bit more than the Sherman.
I really love the short fat barrel!

Plus, the top plate...which is the first fit I don't like.
The top plate is located by four tabs sticking up from the sides of the turret.
When securely in place, there is a seam all the way around the turret (that's fine(
but it is broken by these four interlocking tabs.
I tried sanding everything smoother in an attempt to hide these tabs,
but it will require putty to do so - something I decided I was not going to do.

So, I'm living with it.
Only a minor issue with this build.

View attachment 142359
View attachment 142360
View attachment 142361
View attachment 142362



.............................
The turret fits to the hull in the same manner as the Sherman, with two locating tabs that lock it to the hull.
It swivels tightly but smoothly.

You will also notice I have attached all the detail parts to the Turret...there's quite a few parts, including hatch details and the flare pots.
Next up is paint.

View attachment 142367
View attachment 142368

This is the Retrokit upgrade I was mentioning on top of the Meng T-34. You have to remember that the Tiger-34 is a T-34/85 underneath a bunch of plywood made up to look like a Tiger 1 so the turret is further ahead of where the Tiger turret sits.