1983 Jeep CJ7 Build (ESCI) 1/24

Jon Mopar

Member
Joined
Feb 22, 2024
Messages
42
Here is a build I recently completed of a long-since out of production 1/24 ESCI Jeep CJ7. ESCI was the only one to build a 1980s CJ-7 (with pull door handles). Despite popular belief, the Revell / Monogram kit isn't a rerelease. It's a small difference, but it is significant. The box art says Golden Eagle, however the stripe kit isn't correct for one (mine was missing anyway). The side stripes are Laredo style, not Golden Eagle.

I built mine to replicate a real 83 CJ-7 Limited in a factory one-off custom ordered Deep Night Blue & Light Slate Blue paint scheme. I used automotive paint matched to the factory color codes. Limited was the rarest trim on CJ (from 81-83), and featured painted fender trim, accent colored wheels and pinstripes that matched the color-keyed hardtop and door appliqués.

Over all a great kit…but the roof went together like trash. Nothing lined up and the mold lines were way off. I usually build box-stock but if I had to do it over again, I would have cut all the tabs off and worked on it

Anyway, here it is
IMG_7046.jpeg
IMG_7134.jpeg
IMG_7138.jpeg
IMG_7202.jpeg
IMG_7222.jpeg
IMG_7213.jpeg
IMG_7200.jpeg
IMG_7187.jpeg
IMG_7190.jpeg
 
Last edited:
Hey Joe! I'm doing well. Just got back from NC helping out some family dealing with the flood aftermath. Was hoping to do some paint work today but the weather isn't that great - too wet and humid so cleaning up the office/model/studio room :)
Sorry to hear about the whole flood ordeal with your family and hope things are okay on that front.
 
Awesome build, and compliment the photographer, that last picture looks soo real, it must be the lighting!
That very last picture looks like you could actually jump in it and drive away right??

That's because you can! That's the real Jeep haha. But thank you! I had a lot of fun with this otherwise quick build
 

Latest posts

Back
Top