IDF Magach 7C

[errains]

HOLY COW what and AWE-SOME post!!!

Just outstanding details and workmanship. I'll have to reread this thread several times to get all the info provided here. BTW Nice tan lines on that...ah...tank..yeah that's it...T.A.N.K ;D

 

[Aaron Jefick]

Hello thank you very much for the comments, rather than anything sorry for my English medium defective but I decided to learn Italian rather than English and not mine is very good but I hope to be able to give me to understand; good continuous with this model, paste the bottom plate on the front that was missing, sanding the edges and you place a few hooks that carries:



And again parts of legend make one piece millimeter with your bubble...



So I had it to do:

}

After I went for the support are one piece square with rivets here show them the whole of the work done:



From there go to the four parts, air filters which at first I thought in buying the set of resin, but is incorrect so that I do risk-taking, Michael Mass I support with a few images for the work which thank you very much, for parts began so:



And I had to use a shovel and other things of a Merkava 3 Academy who passed to better life and stay so:









Surfacer and were thus:





Already in place:



Headlight guards were placed had a headache but not they convinced me today the hare again:





Well hope to take another step forward with this model later to upload photos, greetings and thank you for taking a moment to see the post.

If someone can explain me step by step How demons are used pigments, I will be very grateful

 

[ScaleModelMadman]

Excellent craftsmanship, really nice scratch building, really great work.

If someone can explain me step by step How demons are used pigments, I will be very grateful

If you are looking for demonstrations of how to use pigments, there are a few videos on youtube. If I misunderstood your question, please correct me so I can try to help again.

 

[Aaron Jefick]

Hey maybe I did not explain well, what happens is you stop arming tanks, the detail is barely beginning I walked in pigments, for no use of these in the aiacion not handle me to learn, the detail is that I have 2 tanks after retake them and nothing else I can find no way to use the pigments.

 

[Aaron Jefick]

Had commented that it was not very much agree with the finish of the protectors of the lights, and at the end with the help Michael Mass graph, choose to change them, I was in my Office reviewing some papers when fell from my desk a clip... If a clip... just what I was looking for.

It´s the Round 2... fight



Ah, Modeller at any time a piece and if.... a cut here, another there, and let's see how it looks...





Check in the model...



I think it will hold, add some plastic pieces and paste the lighthouse to see the look...



I just convince ;-) so let the other:



I definitely prefer these, I liked more...





Thanks to those who have taken time to see and the comments received. Greetings to all and have a nice day

 

[Aaron Jefick]

I need to be grateful to Thomas Antonsen your support helped me to give me an idea of what to do with this problem, before placing walked watching mortar support which is next to the turret, so I started with a question that was hanging around in my head and I do not worry until you get at this point; what do I do? ... so let's see this is the problem:



I start work removing protruding from the sides of the torretay start to expand the diameter of the same:





Locate and mark where the projection:



when it obtained the required diameter, texture with Mr. Surfacer 500:



make outgoing leaving space for mortar support:





The work of the turret with the skid, first, sanding and remove the handle and sand for better grip of rust oleum:





After giving it a bit of Mr. Masking Sol R to cover what I do not want to paint:



Since this dry, what I do is cut to size with a knife and removed the remaining new and start with the masked area:



The masked over:



Here and without masks and dry and paint:





Now if ready for work that follows:



Well I'm heading for the finish line with this model so we then over here.

 

[letsgobrowns82]

Man I cant wait see this one all done up. Great work!

 

[Aaron Jefick]

Hello thank you very much for the comment continued eyo with this project, with the turret and went by the more difficult, the basket of transport of ammunition, worth mentioning that the turret is incorrect, but already not me I wanted to put more on problems that I better get a M48 turret and do all the work of the plates by the truth this to weep.

First, photo-etch comes but great, so I had to cut them custom-made, in addition I made orifices them to guide the photo-etch and resin pieces:









To the resin piece I did orifices to him and it inserts a telephone wire to him so that takeoff is maintained well and not easily:



and to photo-etch I made a cut him to put the links that go in this part and I put a wire of electronic weld of 3 mm so that it maintained wires that maintain the signallings of identification of the vehicle and also it changes the supports of photo-etch by pieces of laminates of plastic.









Here the result:



For the correct form of the basket tapeworm that to cut photo-etch and they were disaligned me thus I did them with laminates of plastic and I did several orifices to them so that they were correct:







And I forget to me to take photos but what I did it was to cut the telephone wires to size, to stick them of one by one and to put the superior guide for the identification blankets and taking advantage of that I have leftover pieces of other models changes the green part to him so that the resin was full of bubbles:





And later to the lateral ones:



Finished:





I replace the protections of the wires of the smoke throwers:





to the tube the resin support tapeworm bubbles and nothing else cuts the one of plastic and it sticks it so that it was well:











Now if to detail and to finalize the model, the rest is pure pieces of plastic and some resin pieces and the following week I hope in God to finish it, thank you very much to follow to me and to give a little to me his time to read post.

 

[Aaron Jefick]

At last came the postman with my order .... Now if I went back ..... Israeli MAG´s of Greif and Friulmodel links .... also other little things that I asked:





Now Finisshed Magach 7C ... more progress soon.

 

[hummingbird]

Mind blowing works

 

[letsgobrowns82]

Mind blowing to say the least. I look forward to these updates!

 

[Jose Luis Lopez]

............................. your work is just ........... wooow! Thank you very much for sharing. I really admire you!!!!

 

[Aaron Jefick]

Friends thank you very much for your words, I would like to paint Luis the way it does, your paint job is really admirable, I hope one day to achieve these effects. Once again thank you very much and see you soon with more progress on this model, God bless his ways.

 

[geegad]

are there any parts of this tank that your not going to scratch build...love all your work and that not slip looks superb bud

 

[Aaron Jefick]

Knights of this forum who have an excellent day, as advances as of today, there was a detail with the barrel and not mistaken to him because I put a bit of Mr. Surfacer that had a crack and I do not want to risk so later sanding.



And then work with Friulmodels tracks



A detail of sprocket:

This picture is only for discusion in this forum copyright of Michael Mass

and that does not fall to the model ... :-X



So I went to I think to look for one piece and I landed in some parts of an M-47 ... I think I serve ...





To this had to adapt and take away the parts that make the piece snaps correctly:



So it is properly verify the tracks:



And paste



but...... I realized I did not fit well and the review I realize that teeth are different so the sand with a round file.



rivet holes:



drilling rivets and wheel to resemble the most to real:



and come back to check ... ready ;D



Now to remove the model guide and drilling, I came across you need a little more so I put out a round piece that I found myself in the slug.







It ends:





after finishing I went through one of the gates of the turret:



The work today:







My figure made with pieces of the hull tanker came in the model body, the arms and legs are of a tanker's K1A1, hands and head of resin:



Have a nice day, later he continued with this outfit, is now in its final stretch. Greetings.

 

[geegad]

once again outstanding work again it will be a shame to paint this with all you're scratch building

 

[andrei383]

your level of detailing is just insane! amazing job!

 

[errains]

.....JUST

 

[Aaron Jefick]

How about fellow forumers good day, thanks for the comments, for more progress here, I started work cleaning and removing parts of the MAG's:





Also finished work on the hatch, the support of the MAG, also the mortar:







And some things in the basket:



I lost a piece that goes in brackets smoke launchers and I had to make:



I worked resins, to put in place:









And repair the cannon:



Well me and is very close to complete, thanks for watching and the support received for this project, Greetings.

 

[Junkie]

Very nice. Love that spring detail you've added.