M51 super Sherman build
- Thread starter sapper23
- Start date
- Joined
- Sep 4, 2022
- Messages
- 1,004
I haven't done enough armour, or inspected up close, to comment on casting marks. But I have tried drybrush as Kevin mentioned - both lighter and darker than the base colour, sometimes going back in with the base colour - I liked the slight stipple effect of rough mettle you can get. If you are afraid to try it on your model - grab a scrap or 'extra' from the shelf and try stuff on that! I agree, this stage can be very fun, especially if you know there is a path to 'undo'.
Yeah I think that is too much weathering for me. I can weather it with out doing that and make it convincing and look the part .. without making it downright dirty. Thers a line there I think and perhaps your right or I just found mine for the time being..
You have seen my work, not bad not pro level though. I am happy where I am for now with things.
You have seen my work, not bad not pro level though. I am happy where I am for now with things.
Jakko
Well-Known Member
- Joined
- Oct 9, 2024
- Messages
- 575
Or the underside of this model. I often use that to test things I want to use on the upper side but am not yet sure about. All you need is to try a small patch there.
Jakko
Well-Known Member
- Joined
- Oct 9, 2024
- Messages
- 575
I just realised Academy got the orientation of the commander's cupola slightly wrong 
On the model, the glass at the front gives a view mainly of the back of the housing for the gunner's sight, but on the real tank the whole cupola was rotated counterclockwise a bit, so that the sight is largely between two of the glass blocks in the cupola.
Sorry, looked at too many photos of Shermans over the years — hardly anybody is going to notice this, I think
On the model, the glass at the front gives a view mainly of the back of the housing for the gunner's sight, but on the real tank the whole cupola was rotated counterclockwise a bit, so that the sight is largely between two of the glass blocks in the cupola.Sorry, looked at too many photos of Shermans over the years — hardly anybody is going to notice this, I think
Poop ... Oh well I'm going to say it's right and go look at some pictures now.I just realised Academy got the orientation of the commander's cupola slightly wrong
Sorry, looked at too many photos of Shermans over the years — hardly anybody is going to notice this, I think
Jakko
Well-Known Member
- Joined
- Oct 9, 2024
- Messages
- 575
This photo from the Sherman Minutia Website shows it pretty well:
Notice how none of the windows in the commander's cupola is directly behind the gunner's sight.
On the 75-mm turret, the cupola was fitted to have one window directly at the front, but on the 76-mm, it was turned slightly off-centre like the photo shows. Probably, this is because the 75-mm turret has the gunner's sight set more to the right relative to the cupola.
Looking at Academy's instructions, I get the impression there are no locating tabs for the cupola at all, which makes it much too easy to turn it the wrong way. On the real tank, the cupola was bolted to the roof, with twelve bolts off the top of my head, so it can be fitted in any orientation, provided it's in steps of 30 degrees
But like I said: who's going to notice, other than people like me, who spent too long looking at Sherman pictures? Your typical military modeller will see nothing wrong with it, I'm pretty sure.
Notice how none of the windows in the commander's cupola is directly behind the gunner's sight.
On the 75-mm turret, the cupola was fitted to have one window directly at the front, but on the 76-mm, it was turned slightly off-centre like the photo shows. Probably, this is because the 75-mm turret has the gunner's sight set more to the right relative to the cupola.
Looking at Academy's instructions, I get the impression there are no locating tabs for the cupola at all, which makes it much too easy to turn it the wrong way. On the real tank, the cupola was bolted to the roof, with twelve bolts off the top of my head, so it can be fitted in any orientation, provided it's in steps of 30 degrees
But like I said: who's going to notice, other than people like me, who spent too long looking at Sherman pictures?
Your typical military modeller will see nothing wrong with it, I'm pretty sure.Yeah I was looking at different sites info after you said it and there were actually a lot of different things and changes up there and the Israelis actually had three different versions going on up there between hatch's so on so I think it sort of depends on that as well.
