Plymouth Belvedere / Adam-12 Police Car

I took yesterday off and today. Yesterday I didn't too much. Today I got the body painted. I sanded with a 4000 grit which I think will help the gloss coat.

I have one mishap at the fender and driver door which I'll have to spot spray tomorrow.
I added a column shift to the steering.

Tomorrow I might try to shoot a satin coat over the seats and the interior white paint.
 

Attachments

  • 20230907_200602.jpg
    20230907_200602.jpg
    240 KB · Views: 5
  • 20230907_200654.jpg
    20230907_200654.jpg
    500.3 KB · Views: 4
  • 20230907_200549.jpg
    20230907_200549.jpg
    462.2 KB · Views: 4
  • 20230907_200645.jpg
    20230907_200645.jpg
    415.1 KB · Views: 5
  • 20230907_200637.jpg
    20230907_200637.jpg
    252.1 KB · Views: 6
  • 20230907_201355.jpg
    20230907_201355.jpg
    341.1 KB · Views: 6
I took yesterday off and today. Yesterday I didn't too much. Today I got the body painted. I sanded with a 4000 grit which I think will help the gloss coat.

I have one mishap at the fender and driver door which I'll have to spot spray tomorrow.
I added a column shift to the steering.

Tomorrow I might try to shoot a satin coat over the seats and the interior white paint.
The column shifter is a great touch. Looking good
 
Need some advice please. Never really done a shiny finish before as the armour is usually matt and covered in mud anyway. So I'm happy with the glossy finish and mottled look but should I really sand it all down and go for glossy flat finish? Tell me what you think and don't hold back with your comments.

Probably not the best photos as did them in the spray booth so they show the reflection.
Pantherman
I like the gloss.
I'm going to try the Vallejo polyurethane.
 

Attachments

  • 20230907_183419.jpg
    20230907_183419.jpg
    325.4 KB · Views: 0
Need some advice please. Never really done a shiny finish before as the armour is usually matt and covered in mud anyway. So I'm happy with the glossy finish and mottled look but should I really sand it all down and go for glossy flat finish? Tell me what you think and don't hold back with your comments.

Probably not the best photos as did them in the spray booth so they show the reflection.
Pantherman
Maybe a wet sand with 2000 or 3000 grit and then a clear coat.
 
Maybe a wet sand with 2000 or 3000 grit and then a clear coat.
Absolutely. I have a few different grits. It makes a big difference.
I started not to sad at all, but I figured that I'll continue just putt putting along.
 
Need some advice please. Never really done a shiny finish before as the armour is usually matt and covered in mud anyway. So I'm happy with the glossy finish and mottled look but should I really sand it all down and go for glossy flat finish? Tell me what you think and don't hold back with your comments.

Probably not the best photos as did them in the spray booth so they show the reflection.
Pantherman
Well I did some sanding and gave the body another 3 coats. It's better but not great. I have started to fit the clear parts so they are all glued in, just got to polish them up when they dry. Pantherman
 

Attachments

  • 20230909_144049.jpg
    20230909_144049.jpg
    149.6 KB · Views: 5
  • 20230909_144113.jpg
    20230909_144113.jpg
    257.8 KB · Views: 5
  • 20230909_144142.jpg
    20230909_144142.jpg
    203 KB · Views: 5
Well I did some sanding and gave the body another 3 coats. It's better but not great. I have started to fit the clear parts so they are all glued in, just got to polish them up when they dry. Pantherman
Looking very nice!
 
I'm getting there.
I have the interior assembled. I'll probably spray a satin varnish over it tomorrow or maybe even tonight.

I'll have to change needles to a 5 for the polyurethane for the body.
 

Attachments

  • 20230909_204730.jpg
    20230909_204730.jpg
    368.2 KB · Views: 7
  • 20230909_204746.jpg
    20230909_204746.jpg
    209.6 KB · Views: 6
  • 20230909_204829.jpg
    20230909_204829.jpg
    208.6 KB · Views: 6
  • 20230909_204840.jpg
    20230909_204840.jpg
    214.3 KB · Views: 6
I'm getting there.
I have the interior assembled. I'll probably spray a satin varnish over it tomorrow or maybe even tonight.

I'll have to change needles to a 5 for the polyurethane for the body.
Looking good.
 
Got the chrome done around the front and back and the small triangular windows. It might be a little difficult to see the chrome in these pics.

I attached a pic of the chrome pins I use. They work really well.

I remember those small windows. They would really push the wind inside!
 

Attachments

  • 20230910_005604.jpg
    20230910_005604.jpg
    279.5 KB · Views: 4
  • 20230910_005548.jpg
    20230910_005548.jpg
    264 KB · Views: 4
  • 20230910_005536.jpg
    20230910_005536.jpg
    254.5 KB · Views: 4
  • 20230910_005521.jpg
    20230910_005521.jpg
    290 KB · Views: 4
  • 20230910_010340.jpg
    20230910_010340.jpg
    471.2 KB · Views: 4
Got the chrome done around the front and back and the small triangular windows. It might be a little difficult to see the chrome in these pics.

I attached a pic of the chrome pins I use. They work really well.

I remember those small windows. They would really push the wind inside!
Coming along nicely, like the chrome trim. I will have to get one of those chrome pens. Pantherman
 

Latest posts

Back
Top