thanks, i managed to get it out without breaking. next time im gonna tape up the plastic to stop this from happening again.Polishing it out is the only way .
hopefully it's not too deep
ill get some, is course polish too much for it, should i just stick with fine?Use a PVA glue for clear parts .
or even acrylic medium
Hi PVA is white glue , normally used for woodwork also called Polyvinyl Adhesive. Great when mixed with water to make a suitable spray for applying static grass. I would use rubbing alcohol first again mixed with water to release the surface tension for that .looking better. It also had paint and glue mixed. Most of that came off by scrubbing with qtip with alchohol on it by hand. Once that was off i realized a qtip fits perfect in my tool so that makes things faster.
View attachment 125835View attachment 125836
Here are the glues i have in the house. I also have wood glue, gorilla glue, and loctite extreme, shoe goo and similar glues in shop.
View attachment 125839
My apology but i have never heard of pva glue.
Thank you for explaining" My apology but i have never heard of pva glue. "
That's the Elmer's Glue All
" polyvinyl acetate "
All the white glues and yellow wood glues are PVA or PVAc , the c being a compound monomer with a vinyl alcohol mixed with the vinyl acetate ( yes , I know , eye glaze )
this is good stuff , dries completely clear and higher adhesion on plastic over Elmer's ,
https://www.scalehobbyist.com/catag...t=2&u=0&pg=2&ppp=48&sb=stocknumber_a&so=d&e=0
It is also a PVAc
looking better. It also had paint and glue mixed. Most of that came off by scrubbing with qtip with alchohol on it by hand. Once that was off i realized a qtip fits perfect in my tool so that makes things faster.
View attachment 125835View attachment 125836
Here are the glues i have in the house. I also have wood glue, gorilla glue, and loctite extreme, shoe goo and similar glues in shop.
View attachment 125839
My apology but i have never heard of pva glue.
I think it was Tim here who recommended it, but for the last month or so I've been using this instead of Elmer's (PVA) for clear parts.
So far I am loving it, thanks Tim!
View attachment 125995
its not cheap is it lol, 2oz bottle 9 to 14 bucks, tiny bottle for that much. But nothing is cheap now days, burger n shake yesterday was 15 bucks.Meh… not bad but not the greatest. I use this stuff occasionally:
https://www.scalehobbyist.com/catag...t=2&u=0&pg=2&ppp=48&sb=stocknumber_a&so=d&e=0