Andy's Tamiya 1/35 M1A2 Operation Iraqi Freedom

[Andy the Sheep]

I am building the first kit out of three a friend gave me when he decided he wasn't modelling anymore; the other 2 kits are, respectively, a Tamiya 1/48 F16C Aggressor and a ICM 1/32 C 42.
Now that he passed away (he was 91), I'm going to build his kits as a memorial.
I began with the easiest one, the 1/35 Abrams M1A2 Op Iraqi Freedom by Tamiya. Absolutely an OOB build, rubber band tracks included.
Paint is going to be mainly AK Real Sand (FS 30277). Other small parts, including transparencies, were painted with Tamiya acrylics while the tracks were dabbed with a mixture of old Humbrol enamels (mainly gun metal, rust and brown) and A-MIG 0191 Steel for the polished parts.
Like most of Tamiya products, there's nothing that went wrong up to now, so I'll just publish some pics to illustrate the progresses and show where I'm now after a week from the beginning.

First the sprue shots

then the first sub assemblies


including my "Three men and a half" (to say nothing of the dog)...


Turret taking shape


... and finally it begins to look like an Abrams with some initial weathering of the lower hull before gluing the huge side skirts (panel liner still wet on the sprocket wheel, rubber parts will require some touch up).

Comments, suggestions and abuse, when directly referred to the model(er) are all welcome.

Andrea

 

[Andy T]

Following along Andrea. What a great tribute to your friend.

 

[scottie]

Chair pulled up, a very fitting tribute.

 

[Steve Jones SMS]

Will sneak in with the rest of the rabble. Looking good so far. Good luck with the rest

 

[JOHN R]

Rabble you say front seat please Andrea. Great tribute to your late friend .

 

[Scratchbuilder]

I'm in, having read the book 'Heavy Metal' A tank company's battle to Baghdad. by Capt Jason Conroy USA, and 'Thunder Run' by David Zucchino have the kit on the bench now ready to go in the next few weeks...
But I will watch and learn from you, and steal any ideas and solutions...
Will you be providing tea and cookies or is it bring your own ....

 

[Steve Ski]

Solid kit, great start, Andrea!

 

[CCWWII]

I am always amazed at how well you all put things together with details creating realism. Just amazing! Your late friend would be amazed and honored at the work you are doing...

 

[Andy the Sheep]

Main paint coat is on



As announced I used the AK Real Sand with just a drop of Zinc Chromate Yellow as the original hue was a little too brown, to my eyes at least.
Then I tried to create some variations adding 2 drops of White and some thinner to what remained in the airbrush cup, but it seems I was too shy and the difference is hardly visible. A final mist of Mr Color levelling thinner added to the "dirt" in the cup was the final touch.

Tomorrow clear gloss coat, then some days away from the bench for a family travel to our old home town, Turin.
This will allow the gloss coat to dry thoroughly and be ready for the weathering phase.

A public mention to Mike aka "Scratchbuilder" for the precious references he provided me; those will be precious for the final phases of this build.

Comments and abuses are welcome as usual.

Andrea

 

[Andy the Sheep]

I am always amazed at how well you all put things together with details creating realism. Just amazing! Your late friend would be amazed and honored at the work you are doing...

Too kind of you. To be honest, Tamiya helps a lot; Takom or Trumpeter would have caused more troubles, to me at least.